16
IMPORTANT
Always remove the plug from the socket in any emergency situati
on.
4.7 Warning
Electrical or mechanical maintenance has to be undertaken by qualified personnel.
The person in charge of maintenance has to be sure that the machine is under TOTAL
SAFETY condi
ti
ons when working.
4.6.1 Danger
Any maintenance with the machine in working situa
ti
on is dangerous.
TURN IT OFF BY PULLING THE PLUG OFF THE SOCKET DURING MAINTENANCE.
9
2.2.3 Placing the Cap
The Cap # 01 (Pic.01) may be used to watch the process, and also to add ingredients during
opera
ti
on.
To remove the Cap just turn it clockwise un
ti
l it gets free then li
ft
it, See picture 03 below.
3. Opera
ti
on
3.1 Star
ti
ng
- Place the Plug into the Socket;
- Place the General Switch # 09 (Pic.01) on posi
ti
on “I”;
- Start the equipment placing the ON/OFF Switch # 08 (Pic.01) on posi
ti
on ”I”.
Use the Speed Control Switch # 07 (Pic.01) to se
tt
le the speed how required by the receipt
, in case ideal speed is not known use maximum speed.
- To switch the equipment OFF place the ON/OFF Switch back to posi
ti
on “O”;
- Use Pulsar Switch to obtain a be
tt
er ingredients distribu
ti
on inside the Cup.
3.2 Feeding Procedure
Remove the Lid # 02 (Pic.01) along with its cap # 01 (Pic.01).
With the equipment switched OFF place inside the cup # 03 (Pic.01) the receipt liquid
products, then drop the more consistent products.
PICTURE 03
