-
While holding the Learn/Set button on the Wireless External Alarm until all the LEDs turn
off. You may release the Learn/Set button when the Learn/Set LED stay on.
-
Press and hold the Learn/Set button on the Wireless External Alarm for 2 seconds until it
emits 2 beeps and all the LEDs flash twice. Now you may release the ‘Learn’ button.
-
All the learned devices have been erased.
5. Setup – Alarm sound duration
User can customize the alarm period from 30 seconds up to 10 minutes. The factory default of
the alarm period is 30 seconds.
-
Press and hold the Learn/Set button on the Wireless External Alarm for 5 seconds, you
may release the Learn/Set button while all the LEDs turn on.
-
While the PWR and Learn/Set LED stay on, press the Learn/Set button once on the
Wireless External Alarm, the LEDs flash once indicating the alarm period is set to 30
seconds.
-
If you would set the other alarm period, continue to press the Learn/Set button. Refer to
the table below for the alarm period. The LEDs will flash corresponding to the number
you pressed the Learn/Set button.
1- 30 seconds
2- 60 seconds
3- 3 minutes
4- 5 minutes
5- 10 minutes
-
Press and hold the Learn/Set button to confirm your setting. You will hear 2 beeps and
the LEDs will flash twice indicating the alarm period is now programmed to the Wireless
External Alarm.
6. Setup – Arming Sequence
The Wireless External Alarm can be programmed to react 2 arming sequences when it receives
the signal from the sensor. In order to arm the Wireless External Alarm, the remote (optional)
must be programmed to the Wireless External Alarm. You may arm the Wireless External Alarm
in 2 different sequences:
