54
Enable / Disable PIN
1. Click
to display the Setting interface.
2. Select RUIM Card Tab.
3. Select Enable or Disable in PIN Mode.
4. Enter PIN Code, and Click
.
Change PIN Code
1. Click
to display the Setting interface.
2. Select RUIM Card Tab.
3. Select Change in PIN Mode.
4. Enter pin code for Old PIN Code, New PIN Code and Verify New PIN Code, and
then Click
.
Note
Entering the wrong PIN codes for 3 times, the RUIM card will be locked and
cannot use it until you have entered the correct PUK code. The NetKit prompts
you each remaining number of attempts for entering the PIN code or the PUK
code.
Selecting Always On Top mode
1. Click
to display the Setting interface.
2. Select User Tab.
3. Select ON or OFF in Always On Top, and then Click
.
