21
DesignView Presentation System is a product of Skyline Exhibits
Patents Pending
©2011 Skyline Exhibits
DesignView
®
Presentation System
aPPEnDIX - nEc ProjEcTor
fReQUenTlY asKeD QUesTIons - Part 2 (
obtained from Skyline Dealers)
1.
What do I do if the projected image is displayed backward?
a. Switch to rear projection (if the projector is behind the screen).
1. Press the
menu
button.
2. go to the “
basic
” tab.
3. Highlight “
Desktop rear
”.
b. Switch to front projection (if the projector is set up in front of the screen).
1. Press the
menu
button.
2. go to the “
basic
” tab.
3. Highlight “
Desktop front
”.
2.
What do I do if my projected image is getting worse as I make adjustments?
a. reset the projector to its original settings.
•
go to menu and select
ReseT
.
3.
What do I do if the image is not displaying on the screen but is displaying in your
computer?
a. Press Function
f8
(this varies from computer to computer).
b. adjust the screen proportion (see directions below).
4.
What do I do if the image displayed “screen Proportion” appears to be the wrong.
a. check the
screen Ratio
.
b. open Display, click
sTaRT
, point to
seTTInGs
, click
ConTRol Panel
, and then double-click
DIsPlaY
.
c. on the
settings
tab, under
screen Resolution
, drag the slider to the second screen, and then click
aPPlY
.
•
Select Screen ratio to 1024 x 768 for the correct projector resolution.
d. When prompted to apply the settings, click
oK
. Your screen will turn black for a moment.
e. once your screen resolution changes, you have 15 seconds to confirm the change. click
Yes
to
confirm the change; click
no
or do nothing to revert to your previous setting.
