Skyjack SJIII 4740, Operating Manual

Page: 42 / 94

Component Identification Section 3 - Operation
3.6-3 Using Optional Control Box with Long Cable
from Ground:
WARNING
Skyjack scissor lifts are to be operated
from the operator’s position on the
platform with the control box secured on
the mounting bracket at the front right
portion of the platform. Operation of the
unit from the ground is permissible only
when maintaining the lift or, in limited
circumstances, when an obstruction
precludes the safe operation of the
lift from the operator’s position on the
platform. Operation from the ground
is to be performed as set forth in the
Operating Manual.
1. Before operating this MEWP, perform the following
steps:
• Visual and daily maintenance inspections
(see Section 2.3 )
• Function tests (see Section 2.4 ).
2. Ensure the platform is in the fully-stowed (lowered)
position.
WARNING
To protect against unintended movement
of the MEWP, push in the emergency stop
button after you have arrived at your
desired location.
3. Disconnect and remove platform control console
from the mounting bracket at the front right portion
of the platform.
WARNING
Ensure that you maintain three points of
contact when using the ladder to mount/
dismount platform.
Operation from the Ground:
4. The control box with long cable may be connected
to the lower base control connector or to the
platform control connector.
NOTE
For some models, the connection is located
beneath an access panel which requires
that the scissor assembly be raised to
access it.
Figure 3-10. Control Box with Long Cable
Page 42
SJIII 4740