Skyjack SJ 68RT Series, Operating Manual

Page: 47 / 92

Rough Terrain Scissors
December 2007 Page 47
Section 3 - Operation Start Operation
3.8-5 To Drive Forward or Backward
WARNING
Be aware of blind spots when operating
the aerial platform.
WARNING
Ensure that there are no personnel
or obstructions in the path of travel,
including blind spots.
1. Activate platform controls (refer to Section 3.8-3 ).
2. On platform control console, select lift/drive switch
to “ ” drive position.
3. Activate and hold “ ” enable trigger switch.
4. Move controller handle “ ” forward or
“ ” backward to desired speed and direction
of platform travel.
5. Return controller to neutral center position to stop.
Release “ ” enable trigger switch.
WARNING
To protect against unintended movement
of the aerial platform, push in the
emergency stop button after you have
arrived at your desired location or
elevation.
3.8-6 To Steer
1. Activate platform controls (refer to Section 3.8-3 ).
2. On the platform control console, turn lift/drive
switch to “ ” drive position.
3. Activate and hold “ ” enable trigger switch.
4. Press “ ” rocker switch on top of controller
handle in either direction to steer.
NOTE
Steering is not proportional. Driving and
steering may be active at the same time.