Rough Terrain Scissors
December 2007
Page 35
Section 2 - Familiarization
Procedures
It is the responsibility of the operator to read, completely understand and follow all instructions and warnings
contained in this operating manual and on the aerial platform.
F
AMILIARIZA
TION
2.5-2 To Release the Brakes Manually
WARNING
Do not manually disengage brakes if the
aerial platform is on a slope.
1
2
Figure 2-9. Disc Brakes System
NOTE
Brakes must be manually disengaged for
pushing, winching or towing.
1.
Ensure aerial platform is on level ground. Chock
or block wheels to prevent aerial platform from
rolling.
2.
Turn main power disconnect switch to “
” off
position.
3.
Locate brake auto reset valve plunger (item 1) and
brake hand pump (item 2) at the main manifold in
the hydraulic/fuel compartment.
4.
Push in brake auto reset valve plunger.
5.
Grasp brake hand pump and rapidly depress
until firm resistance is felt. The brakes are now
released.
6.
Remove wheel chocks or blocks, then push, winch
or tow aerial platform to desired location.
WARNING
Brakes must be reengaged immediately
after reaching the desired location.
7.
Position aerial platform on a firm and level surface.
8.
Chock or block wheels to prevent aerial platform
from rolling.
9.
Reengage brakes by pulling out brake auto reset
valve plunger.
Summary of Contents for SJ 68RT Series
