1. INTRODUCTION
Thank you for purchasing Apollo (SKA400), Skye Instrument’s single-channel display meter. Apollo is
optimised for use with Skye amplified light sensors, but can be used with other manufacturers’ sensors also.
Please see Appendix 2 for more information on what sensors can be used with Apollo.
It is designed to be held and used comfortably in one hand, whilst the other is in control of the sensor.
The menu is easy to navigate, and if bought as part of a package ( Skye sensor(s)), you can start
taking readings instantly.
Apollo is compatible with single channel, voltage output sensors, with outputs in milliVolts and Volts,
which in turn can be scaled to Wm-2 / mWm-2 / UV-Index*, using data supplied on the calibration certificate
of your sensors. Up to two (scaling factors) can be used for each sensor.
The display whilst taking a reading shows two lines of data, showing either live readings plus units, or
a “held” display using the Hold key. The display can be toggled between two pre-set scaling factors/units.
Apollo is splashproof only (Skye sensors are fully-waterproof as standard), with Binder 5-pin female
socket for sensors.
*UV-Index reading only meaningful with UV-I sensor
1
Apollo Display Meter
