STEP 1
CREATING A FUSE
Use only genuine Skycat Fuse® wire. Wrong wire strength and electrical properties
might cause malfunction.
1) X68: Measure and cut 125 mm long Fuse wire.
2) X55-CF: Measure and cut 135 mm long Fuse wire.
3) Loop both ends of the wire and join the wires using four fuse locks.
IMPORTANT!
- Leave a 3mm gap between wire ends!
- Use high leverage straight pliers.
- Use enough force so that the Fuse locks are fully crimped.
-
It is recommended to use four locks when flying with Skycat. Using two
will be enough, but it’s only recommended for training purposes on the
ground.
www.skycat.pro
All Rights Reserved
5
