STEP 5
AIRCRAFT INSTALLATION
1) Install the launcher so that the base is supported against recoil forces.
Do not cover bottom holes. The piston requires adequate airflow to
function properly. Use velcro to hold the launcher in place.
2) Use velcro or double sided tape to mount the trigger. Choose the
location so that you can easily disconnect the launcher from the trigger
when necessary.
3) Connect the trigger to your receiver.
4) Use the included extra strong lines to connect parachute to your aircraft
frame at three different locations. Pay very much attention to the
strength of the mounting locations! Impact force can exceed hundreds
of kilograms if parachute is ejected during freefall. We recommend
running the lines around multirotor arms to get best possible strength.
IMPORTANT!
- Do not overtighten the straps! It could prevent the piston from moving
freely!
- Pay extra attention to the wiring. Make sure they are securely fastened
away from sharp corners and that they are not under tension.
www.skycat.pro
All Rights Reserved
13
