STEP 8
BEFORE FIRST FLIGHT
IMPORTANT!
- Remove propellers from your aircraft!
- Disconnect launcher from the trigger! Use a multimeter or a 12V light
bulb to determine between “on” and “off” positions.
TEST SWITCH FUNCTION
1) Apply 10-30% throttle
2) Flip the switch
Repeat with each flight mode (manual, ATTI, GPS etc..). Motors should always
stop and trigger should activate. If not, re-do STEP 6
TEST FAIL-SAFE FUNCTION
1) Apply 10-30% throttle
2) Turn off your transmitter
Aircraft should go into fail-safe mode that you set-up in STEP 7. If you chose
to eject the parachute, motors should stop and trigger should activate. If you
chose to activate your flight controller’s failsafe, trigger should
not
activate.
www.skycat.pro
All Rights Reserved
17
