www.skycat.pro
All Rights Reserved
5
System power requirements
V2 Trigger takes operating voltage from the controlling device through the three
pin PWM wire.
Operating voltage range: 4,9 - 6,1 V.
V3 Pro trigger has built in 5V voltage regulator (500mA output) which powers
the trigger and receiver. If you want to use another power source for receiver,
please disconnect the red wire of V3 Pro trigger’s three pin PWM wire.
Power source for parachute launch can be aircraft's flight battery or a dedicated
launch battery.
Launch battery requirements:
-
V2 trigger: 3-4S Li-Po, V3 Pro trigger: 3-6S Li-Po
-
Capacity 1000mAh or bigger.
-
Sufficient C value (able to provide 30A continuous and 70A peak current in
all working temperatures).
