www.skycat.pro
All Rights Reserved
22
Check procedures
Before-flight checklist
Confirm that:
•
All components are undamaged.
•
Launcher is connected to the trigger unit.
•
Trigger unit is in standby mode (short blink, long pause) after powering
Rescue Radio and parachute system.
•
Parachute cord is connected to the harness properly.
•
All screws are tight.
•
Battery compartment lid is securely closed.
After-launch checklist
Check components and functionality after every launch. Confirm that:
•
Parachute and harness lines are not damaged.
•
Launcher spring is securely connected to the piston and base.
•
Launcher tube and base are undamaged.
•
Wires are securely fastened and undamaged.
•
Trigger functions properly.
Trigger functionality
We recommend testing trigger functionality regularly.
1)
Disconnect launcher from the trigger unit.
2)
Connect a multimeter or a suitable light bulb to the trigger output.
3)
Power on your Rescue radio and parachute system.
4)
Press the Rescue Radio eject button.
5)
Check that trigger outputs voltage / bulb lights up. Remember to re-
connect launcher before flying!
