SkyCaddie® TOUCH User Guide
©2015 SkyHawke Technologies, LLC. All Rights Reserved. v.1.1
Page
18
SkyCaddie Mapper, the Driving Range feature will display the
actual distance to each yardage sign based on the location of the
hitting area. You can access it by pressing the “Hole in Play”
button to display the Hole Selection screen. Next, press the “DR”
button near the top of your screen.
•
Dynamic RangeVue™:
Multiple yardage arcs overlay fairway
landing areas and greens to allow you to select the best club for
every shot much more quickly. Use RangeVue™ to get the
distances you need to start playing smarter and faster from tee to
green. Press anywhere on the HoleVue screen to display or hide
Dynamic RangeVue. By default, RangeVue is set to be on.
•
Mark Ball:
The Mark Ball feature of your SkyCaddie TOUCH
calculates your shot distance. This feature is useful in determining
how far you typically hit each club in your bag, leading to better
club selections and an overall improvement in course
management. To use, press the Mark Ball Button, then press the
“Mark” button before taking your shot. Press the “Mark” button
again when you get to the location where your ball landed and the
shot distance will be displayed.
•
Digital Scorecard:
At the end of each hole, the Score Entry
screen will display if “Prompt Score is turn ON (see section 3.4.3).
Your TOUCH does not automatically track your scores, however
you can enter them after you play each hole. (Also see section 3.4
for more related to scoring.)
•
Line of Play:
Whether you can see what’s ahead or not, you can
measure to any point on the hole by moving the cursor in the
yellow intended line of play. Simply press and hold anywhere on
the HoleVue screen to adjust its position. Drag your finger to the
intended position and then lift up off the screen. The SkyCaddie
TOUCH will now calculate distances to this new position. (See
section 3.1.3.)
•
Green Distance:
To enlarge and access detailed information on
the hole in play, press on the Green distance number, which
shows the direct distance between the current position of the
cursor and the center of the green (or the current pin position,
based on the placement of the crosshairs in IntelliGreen; section
3.3), displayed at the top right of your screen. Press again on the
Green distance number or on the pop-up itself to return to the
previous golf view. If the screen isn’t touched for several
seconds, the TOUCH will also revert back to the HoleVue screen
on its own.
Summary of Contents for TOUCH
Page 1: ...User Guide ...
