Film
Thickness
(mic)
75~100
125~150
175~250
Paper
Temp
( C)
Speed
A2/A3 A4
Temp
( C)
Speed
A2/A3 A4
Setting without Carrier Setting with Carrier
Copy Paper (80gsm)
Art Paper (120gsm)
Hard Paper (200gsm)
If user use a low temperature film, please decrease 15~20
To avoid machine damaged, please set suitable temperature and speed.
To avoid machine damaged, please set suitable temperature and speed.
100
100
100
120
120
130
120
140
140
6
5
4
4
3
3
3
2
1
7
6
5
5
4
4
4
2
2
4
4
3
3
3
2
2
2
1
5
5
4
4
4
3
3
3
2
130
130
130
130
140
140
140
140
140
Copy Paper (80gsm)
Art Paper (120gsm)
Hard Paper (200gsm)
Copy Paper (80gsm)
Art Paper (120gsm)
Hard Paper (200gsm)
Film Entry
Main Switch
Power cord inlet
LCD Display
Film exit
1. Turn the switch on
2. If it is not the first use,
Press POWER button for 1 second.
Press HOT button.
Initial setting for 100 MIC is 100 , speed 6.
Hot mode icon flickers.
3. When it's ready, there will be beep sound for 3 times.
You can start to laminate.
Warning - Insert the sealing of film forward.
4. Beginning lamination
- If user wishes to laminate faster: User can
increase the speed (the step of 1~9)
- When adhesion of lamination is not satisfactory,
increase the temperature.
5. Finishing lamination
Press POWER button for 1 second.
Once it reaches below 65 C the power stops automatically.
(Keep the temperature 80 C and speed 2 for STAND BY mode.)
Warning
Do not turn off the Switch as soon as finishing lamination to
prevent overheating. Follow the Upper method.
After the roller cool
down, there will be beep sound for 5 times and then
power will be
stopped automatically.
6. Cold lamination
Press COLD button.
- When the READY lamp indicates on LCD with beep sound, user
can start laminating. (User can use cold film only.)
- If user afraid to damage on material, should use COLD lamination.
6
7
7 Lamination Guide
9 How to Use
8 Description
Summary of Contents for R6
Page 1: ......