ASSEMBLY
STUNT DRONE BUILDER
E1700
01742
APP INSTRUCTIONS
- Animated step-by-step
instructions
- Learn how drones work
DOWNLOAD THE SKY VIPER
BUILDER APP
FOR FREE
STEP THREE
Connect the power socket (this is part of the flight controller board) to the main body
frame and clip it into place. Attach the flight controller board to the main frame using
3 type E screws. Ensure that the screws are secure but not over tightened.
Attach the top cover to the main body frame, ensuring that all locating pins line up
with their sockets. Gently squeeze the two parts together and then give a tighter
squeeze once in place.
STEP TWO
Insert the motor connectors into the flight controller board.
Connect the black plugs to the black connectors and connect the white plugs to the
white connectors.
STEP ONE
1st
2nd
CONTENTS
1
2
3
4
5
6
17
15
22
23
24
25
18
20
16
19
11
13
14
21
26
12
7
8
9
27
10
1. Main body frame
2. Flight controller board
3. Top cover
4. Bottom cover
5. Battery tray
6. 650mAh LiPo Battery
7. 4X Motors
8. 4X Green Propellers
9. 4X Black Propellers
10. Screws (A)(B)(C)(D)(E)
11. Screwdriver
12. 2X Green arm covers
13. 2X Red arm covers
14. 4X Blade guards
15. 2X Pro style thumb sticks
16. 2X Joystick thumb pads
17. Stunt button
18. 2X Joystick covers
19. Antenna housing
20. Sensitivity switch
21. Power Button
22. Controller housing (Front)
23. USB lipo battery charger
24. Transmitter circuit board
25. Controller housing (Rear)
26. Battery compartment insert
27. Battery cover
1 Sticker sheet included
