14
DIMENSIONS, DIAGRAMS AND
CHARACTERISTICS
A
B
C
D
Brakes
A lines – red
B lines – blue
C lines – purple
D lines – green
Brake lines – yellow
1) Cross-Section of METIS 3/40 & METIS 3/42
GENERAL INFORMATION
Note: This guide conforms to requirements specified by EN 926-2:2005
as well as LTF NfL II 35/03 for user manuals.
Model name: tandem paraglider METIS 3/40 & METIS 3/42
Name and address of manufacturer:
Sky Paragliders a.s.
Okružní 39, 739 11 Frýdlant nad Ostravicí, Czech Republic
Tel. 00420 558 676 088, [email protected],
www.sky-cz.com
Total minimum and maximum weights in flight: see the technical data.
Maximum brake range at maximum take-off load: conforms to EN 926-
2/2005.
METIS 3/40 & METIS 3/42 is a tandem glider for pilots who are training
for tandem paragliding in a recognised training school or who already
hold a tandem flight license. The METIS 3/40 & METIS 3/42 demonstrate
good passive safety, have tolerant flight characteristics and their resistance
to departure from the normal flight envelope make them well suited for
tandem flight.
The METIS 3 has been certified in Category B, having met all
the requirements of EN 926-2/August 2005 and LTF NFL II 91/09.
This user manual version is dated 1 July 2013.
LEVEL OF CONTROL REQUIRED
The responsibility of flying with a passenger should only be undertaken by
pilots with adequate flying experience.
As well as holding a license issued by the pilot‘s National Federation
or Association, the pilot shall also have adequate liability insurance covering
all risks to third parties relating to tandem paragliding activities.
14
Summary of Contents for METIS 3
