User manual / Handbuch / Navod k obsluze
Gii 4
1.2. Certification
Gii 4
has passed the certification according to load test EN
1651:1999 and this harness conforms to the testing criteria of
the „Luftfahrt-Bundesamts LTF 91-09 (LTF - Luft Tüchtigkeits
Foderungen, or ”Flying Craft Airworthiness Standard”). Any
alteration of the harness can invalidate all the aforementioned
certifications.
Please note:
Use of this harness is at your own risk. Any
liability of the manufacturer or distributor is excluded. The pilot
is responsible for airworthiness of the aircraft. The pilot must
comply with legal regulations.
1.3. Pilot‘s Profile
• Pilots who prefer “upright“ position.
• Paragliding schools and novice pilots.
• Pilots who like simple solutions and low weight harness.
1.4. Scope of delivery
• Harness.
• Rescue handle.
• Integrated rescue V-bridle.
1.5. Features
• Simple strap system and easy adjustment.
• Low weight - for its category.
• Integrated airbag protection.
• Integrated rescue container.
2. SET UP
2.1. Fitting the reserve
It is highly recommended that the initial installation of the
reserve parachute be carried out by a qualified professional.
Ask your paragliding equipment supplier or instructor to do it
for you and familiarise yourself with the process. The size of the
reserve pocket on the Gii 4 is suitable for most current reserve
systems. If it is not possible to connect the harness reserve
handle to the loops on the parachute deployment bag inside
the pocket, please consult your supplier who may be able to
supply an alternative deployment bag. Loops can be sewn at
an appropriate place on any deployment bag, but this must be
carried out by a qualified person only.
1
Connect the reserve bridle to the harness risers, secure with
the O rings.
2
Attach the handle to the center loop on the container. Slightly
crease the reserve in two and insert into the pocket.
3
Thread the leafs in sequence using the line provided from the
reserve packing & maintenance kit (located in the rear harness
pocket).
8
