SPG 84 Installation manual
4.
Remote Control:
−
Enable: Remote Arming is allowed
−
Disable: Remote Arming is disabled
Factory Default: Disabled
•
Reply on SMS command:
−
Enable: It will enable SPG84 to send reply SMS to command SMS received before.
- Disable: SPG will not send any reply SMS
Factory Default: Disabled
•
Zone Increment:
The value in this field will be added to the modules own zone numbers. Example: If you already have a 16 zone control
panel than set this to 16. By doing so the 1
st
input of the zone will be numbered and reported as 17
th
.
Factory Default: 0
•
Entry delay time:
Valid values: 0-255 sec
Factory Default: 0 sec
•
Exit delay time:
Valid values: 0-255 sec
Factory Default: 0 sec
•
Bell time:
Valid values: 0-255 sec
Factory Default: 0 sec
•
AC Loss Delay time:
The time SPG 84 will count until send AC loss report from actual AC loss.
Valid values: 0-65000 sec
Factory Default: 0 sec