SKY-HERO Little Spyder, Instruction Manual, Page: 9 / 30

9
INSTALLING THE MOTORS
Orientate the motor in the motor mount, so that the leads can pass through the hole to the tube.
Check that when the motor is in it’s correct position, it will be able to turn freely, and that if there is a
clip on base of the motor, that it is not rubbing against the hole in the middle of the motor mount.
Mount the engines (7) on their supports (8) with the 3 x 6 mm button head screws (5) and washers
(9).Identify which holes will be used to secure the motor and apply a small amount of blue Thread
lock to each hole in the bottom of the motor.
Make sure that there is no excess Thread lock that might make contact with the plastic parts as this
could cause the plastic parts of the frame to weaken and break – with dangerous consequences if
the aircraft is in flight.
Note : For more information on mounting motors, you can visit the
SKY-HERO
channel on
YouTube and watch the video :
“Sky Hero How to Mount Your Motors” : https://www.youtube.com/watch?v=1-xQFuDLJi0
7
8
9
5