Control bar
Power lines join before the bar, come to its middle, enter
through the opening in the bar and fix to the chicken-loop sys-
tem. This system allows to fix the bar to the harness hook and
prevent any unintentional detaches of the kite from the pilot.
Besides, between the chicken-loop system and the power lines
there is a fast release system that allows to release the kite from
the pilot in case of emergency.
On the power lines before the bar there is a system that chang-
es the angle of attack - a trimmer. While loosing the trimmer you
increase the traction power of the wing, while pulling the trim-
mer, you lessen it. With the help of the trimmer you can change
the traction power of the kite during the ride.
Remember that when the trimmer is tightened your kite is more
likely to collapse.
Apart from the trimmer there is another system that can in-
stantly change the traction power of your kite - this is a depower
system. While pulling the bar, you increase the traction, while
loosing it, you lessen it.
One of the safety systems is a leash, one side of which is fixed
to the extenders, another one to the rider’s equipment. In case
of emergency release the kite is still connected to the rider via
the leash. If needed, the leash can be released from the rider as
well.
