Page 5
How Your Skuttle Under Duct Humidifier
Must Be Installed
WARNING:
For warranty validation, this humidifier
must be installed by a licensed hvac contractor.
tools and Materials needed
The following tools and materials are necessary for proper installation of
your humidifier:
Safety goggles
Tin snips or aviation snips
Electric drill or hand drill
3/8" (0.95 cm) and 7/64" (0.28 cm) drill bits
Pliers
Screwdriver (medium-sized flat point)
Pencil or grease pencil
Level
Hammer
Small adjustable wrench
Center punch
Knife
Straight edge yardstick
1/4" (0.64 cm) copper water line
Some installations will require the following, additional materials:
Two conductor, low-voltage wire
1/2" (1.27 cm) I.D. vinyl tubing for
Model 55
drain
1/2" (1.27 cm) I.D. vinyl tubing for
Model 86
overflow
Selecting an appropriate location
Before installing the humidifier, familiarize yourself with the heating system.
Review the typical installations shown in Figures 1-4 for
Model 55
(pages
6 & 7), and in Figures 5-8 for
Model 86
(pages 7 & 8).
CAUTION:
When installing the humidifier, always make
sure the air will be flowing across the unit’s mounting
hinges before it enters the evaporative media.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.