manualshive.com logo in svg

Skuttle 55, Owner'S Manual And Installation Instructions, Page: 2 / 32

Share
Download
Skuttle 55 Owner'S Manual And Installation Instructions Download Page 2

Table of Contents

Thank You!................................................................................................ 1

Warranty Validation Notice ....................................................................... 1

Skuttle Limited One-Year Product Warranty ............................................. 2

How Your Humidifier Works

 ...................................................................... 3

Safety Precautions ................................................................................... 4

How Your Skuttle Under Duct Humidifier Must Be Installed

 ..................... 5

How to Operate Your Humidifier

 ............................................................. 16

How to Maintain Your Humidifier

 ............................................................ 17

Trouble Shooting Guides ........................................................................ 22

FAQs about IAQ ..................................................................................... 24

Skuttle Automatic Flushing Timer ........................................................... 25

Skuttle Model 216 Make-Up Air Control ................................................. 26

Skuttle High-Efficiency Air Cleaners

 ....................................................... 27

The Skuttle “Happy House”­—Your Assurance of Enhanced IAQ ........... 28

Contact Information ..................................................................

Back Cover

CAUTION: 

to protect your investment, please read 

the limited One-Year Product Warranty on page 2. 

Summary of Contents for 55

































Reviews:

No comments