SKS-Kinkel Elektronik GmbH
EN
CASA
Support-Hotline: +49 (0) 2661 98088 112
- 42 -
Version: 1.4
E-Mail: [email protected]
Document art. no. 97010104
3
Resetting the CASA
3.1
Reset to factory setting
To reset the indoor station to the factory setting it is necessary to follow the steps below:
Step
Description
1
Pull off the a+/b- terminal on the back of the indoor station.
2
Press the programming button (Prog. PT1) on the back of the indoor station and keep it pressed
3
Plug in the a+/b- terminal again a confirmation tone confirms that the operation was successful
Once the indoor station has been reset to factory setting, all settings are deleted and have to be made again.
3.2
Reset of software
If there happen to be errors after a software update it is possible to reset the indoor station to the first software
version. To reset the software of the indoor station, it is necessary to follow the steps below:
Step
Description
1
Pull off the a+/b- terminal on the back of the indoor station.
2
Press the update key (Update PT2) on the back of the indoor station and keep it pressed for more than 8
seconds.
3
Plug in the a+/b- terminal again.
4
Keep the update key (Update PT2) pressed for another 8 seconds until the confirmation LED flashes.
Once the software of the indoor station has been reset, it is an older version and all settings are deleted and have to
be re-entered.
