UDJ-1000 Instruction Manual Page
6
13. SAVE BUTTON -
This button can be used in couple of ways:
a. Press this button to activate the memory mode, the save button LED will glow when active. After the
memory mode is activated, press your desired bank button to store your CUE point or playing loop.
b. To store your loops and cue points that are saved in the BANKS to the system memory for next time, press
the MEMORY button for 1 second.
NOTE: RECALL MEMORY: UDJ-1000 can store 4 programmed cue points per folder in the USB device.
These setting may be recalled at any time, even when an audio source has been removed and loaded at a
later time.
To recall the bank memory with USB device: 1) Turn the TRACK knob to select the track which with the
BANKS and “Load Cues?” will be indicated on the VFD, press MIDI PLAYER A (Y) to load or press MIDI
PLAYER B (N) not to load. Or 2) press the SAVE button, LED on, and turn the TRACK knob to select the
TRACK with BANKS that you would like to recall.
14. CLEAR BUTTON -
Press CLEAR button, LED on, or hold the CLEAR button to select the BANK buttons you
would like to clear.
15. PLAY/PAUSE BUTTON -
Each press of the button to change from play to pause or from pause to play.
16. CUE BUTTON -
Pressing the cue button during playback immediately pause playback and returns the tracks
to the last set cue point. In pause mode and the music is at the cue point, press the cue button to provide cue
monitor. The red cue led will lit when the music is at the cue point.
17. CUE PLAY BUTTON -
Press the button to return point and playing immediately. You can also tap the button to
create a BOP effect.
18. SEARCH BUTTONS -
This search button allows you to quickly scan backwards through a track.
This search button allows you to quickly scan forwards through a track.
19. NEXT TRACK BUTTON -
While either playing a track or in pause mode, press this button to search for the
next track you want to play. NEXT TRACK indicators will flash. Now you can turn the FOLDER or TRACK knob
to search for the next track. Press the PRESET button you found your desired track.
20. TRACK KNOB -
This knob has three functions.
a
The knob is used to select a track. Turning track knob will forward/backward skip to next track.
b
Holding down and turning track knob will rapidly forward/backward skip through the tracks by 10
tracks per click.
c
Press track knob to switch file name/title (ID3)/artist (ID3)/Album(ID3)/Genre(ID3) on the VFD.
21. REV. KNOB -
Activate Reverse function to play the track or sampler in reverse. Press the button again to
deactivate this effect.
22. FOLDER KNOB -
Turn FOLDER knob to search the desired folder.
23. SHIFT BUTTON
-
Hold the SHIFT button enables to call up a second function.
GENERAL FUNCTIONS AND CONTROLS (Cont.)
