GENERAL FUNCTIONS AND CONTROLS (Cont.)
UDJ-1000 Instruction Manual Page
4
1. USB PORT -
This is the USB port where you insert your USB mass storage device.
2.
SOURCE SELECT -
Use this button to select USB1/USB2/MIDI music. Hold the SOURCE SELECT button for 2
sec. enter MIDI mode.
3. BRAKE, START DIAL
BRAKE DIAL -
a. When in the VINYL mode, this BRAKE dial determines the deceleration speed until play stops when the jog
wheel is hold down.
b. When in the CDJ mode, this BRAKE dial determines the deceleration speed until play stops when the
PLAY/PAUSE button is pressed.
c. When the BRAKE dial is rotated to MIN, play stops quickly; when the dial is rotated to MAX, play stops more
slowly before coming to a complete stop.
START DIAL -
a. When in the VINYL mode, this START dial determines the acceleration speed until full playback speed is
reached when the jog dial is backspin.
b. When in the CDJ mode, this START dial determines the acceleration speed until full playback speed is
reached when the PLAY/PAUSE button is pressed.
c. When the START dial is rotated to MIN, play starts quickly; when the dial is rotated to MAX, play starts more
slowly before full playback.
4. TEMPO RANGE BUTTON -
Press the button to choose any pitch percentage of 6%, 10%, 16%, and 100%.
With this button you can also switch Pitch Slider on/off, by pressing it for at least 1 sec.
5. KEY LOCK -
This button activates the KEY LOCK function. This function allows you to use the PITCH SLIDER
to speed up or slow down playback speed without altering the tonal pitch of the track.
6. TOGGLE BUTTON (WHEEL MODE) -
Each press the TOGGLE button to select the WHEEL MODE of
VINYL/CDJ/A CUE SCRATCH.
a. VINYL -
When wheel mode is set to VINYL, use the JOG WHEEL to activate the scratch effect by touching
the surface of Jog Wheel.
b. CDJ -
When wheel mode is set to CDJ, scratch mode is exit, JOG WHEEL can be used to pitch bend and
frame search.
c. A.CUE SCRATCH
IN PLAYBACK MODE
While in play mode and when the touch sensitivity function is active, the JOG WHEEL can be used to return
the unit to last IN point.
Simply touch the JOG WHEEL and unit will immediately return to the last set CUE point (BANK LED is not
blinking) or BANK IN point (LED is blinking) and playback without music interruption.
IN CUE MODE
While in cue mode and when the touch sensitivity function is active, tapping on the JOG WHEEL can be used
to start playback.
The unit will continue to playback until the JOG WHEEL is released. Once the JOG WHEEL is released the
unit will return to the last IN point.
7. PITCH SLIDER -
This slider is used to adjust the playback pitch percentage. The slider is a set adjustment and
will remain set until the pitch slider is move or the pitch function has been turned off.
