DOL 634 CE
Technical User Guide
49
House 1
House 2
13.1.3 UTC time
The controller uses two different time settings. A local time which the user can set in the menu
Manage-
ment | House data | Adjust date and time
and the so-called UTC (Coordinate Universal Time) which is the in-
ternal time in the controller used, for example, for time-stamping alarms. However, the time viewed by the user
is always the local time.
For controllers in a network the management program FarmOnline Explorer will automatically make sure the
UCT time is correct.
In controllers not in a network or without access to an NTP (Net-
work Time Protocol) server, the UTC time can be adjusted in
the menu
Technical | Service | UTC time
.
UTC is a default setting and both time settings of the controller
are supported by a battery backup function. UTC time thus only
needs to be set in those cases where the climate controllers
have been without battery backup.
Find the current UTC time, for example on the website
http://www.timeanddate.com/worldclock
13.2 Display
Select the menu
Technical | Service | Display
Backlight
Adjust the brightness of the display to best suit the current location of the controller.
Backlight (Dimmed)
Set the brightness of the display when the controller is not being used.
Backlight timeout
Setting the time from when the controller was operated and until the backlight
dimmes.
13.3 Backup
Select the menu
Technical | Service | Backup
