9
SKOPE VF-ICE Series Ice Storage Cabinet
Operation
User Manual
Defrost
To ensure efficient operation, the electronic controller forces a defrost cycle
when required. During a defrost cycle, the compressor stops,
DEF
and the
will display on the electronic controller faceplate. The ice storage cabinet
will resume normal operation once the defrost cycle has finished. A manual
defrost can also be initiated by pressing and holding the
button.
Continuous
Cycle
The continuous cycle can be used to pull down the temperature of product
inside the ice storage cabinet quickly. During a continuous cool down the
compressor runs continuously for a set time.
To start a continuous cycle
To stop a continuous cycle
Temperature
Setpoint
The ice storage cabinet is manufactured with a pre-set control temperature
set point of -12°C. If this set point does not match your required storage
temperature it is recommended that you change the set point accordingly.
The set point can be adjusted between -12°C and -18°C.
To view and adjust the temperature setpoint
1. While the ice storage cabinet is
switched on and running, press and
hold the
and
buttons for five
seconds.
The
symbol will display during a
continuous cycle.
1. The electronic controller will
automatically stop the continuous cycle
after a period of time.
The continuous cycle can be stopped
by pressing and holding the
and
buttons for five seconds.
1. To view the setpoint: press and hold the
key for 2 seconds, until the
setpoint value flashes
2. To adjust the setpoint: press either the
and
keys to display the
required setpoint value.
3. Press the
key again to memorise
the new setpoint value. If this is not
done within 60 seconds, changes will
be lost and you will need to repeat the
above procedure.
