10
Operation
User Manual
SKOPE VF-ICE Series Ice Storage Cabinet
Controller
Reset
To delete program modifications and reset the controller to SKOPE default
program or when a replacement controller is being fitted, a ‘Controller Reset’
must be performed.
To reset the controller
1. Disconnect the ice storage cabinet from the power supply.
2.
Press and hold the
key while
plugging the ice storage cabinet into
the power supply (this may require two
people). After a few seconds the
controller is reset and program mode
‘
bn0
’ is displayed. The controller must
never be left in program mode ‘
bn0
’ as
failure will occur.
3.
Press the
or
keys to select
‘
bn3
’ for SKOPE default program.
4.
Immediately press the
key to
confirm the preferred program. If not
confirmed within 60 seconds the ice
storage cabinet will remain in program
mode ‘
bn0
’ (and cause failure). If this
occurs, repeat the above procedure.
