5
SKOPE Pegasus Vertical Freezer - Integral
Installation
User Manual
Positioning the Cabinet
Location
When positioning the cabinet, avoid direct sunlight and warm draughts etc.
The cabinet must NOT be situated where it is affected by warm or hot air
(above 40
°C)
from adjacent equipment, as this will compromise the airflow
and performance of the chiller.
The cabinet must be positioned on a level surface for the doors to shut and
seal correctly, and to prevent the condensate tray from overflowing.
Adequate allowance should be made for door opening.
Installation
Guidelines
The maximum recommended ambient temperature (at place of installation)
for the chiller is 32°C. This chiller will generally use less power when
installed in a cooler location.
When installing the cabinet:
Avoid direct sunlight and warm draughts etc.
Allow adequate space for the door/s to open fully.
Ensure the cabinet is positioned on a level surface so the door/s shut
and seal correctly and to prevent the condensate tray from overflowing.
The self-closing door/s have internal torsion bars, pretensioned at the
factory, and should not require any further adjustment.
Do not overload the power supply. See the rating label inside the
cabinet for power supply and current draw.
Power Supply
The chiller is supplied with a 1.8m flexible power cord fitted with a 3-pin plug,
which exits out the rear of the refrigeration unit. The power cord should be
retrieved before the cabinet is positioned, as wall and partitions may make
access difficult.
WARNING:
Heat dispersion and ventilation of the refrigeration unit cannot
be overstressed. The air surrounding the condenser must not
exceed 40°C.
WARNING:
Do
NOT
overload the power supply. See the rating label inside
the cabinet for power supply and current draw.
