10
Maintenance
User Manual
SC112N-AC
3 Maintenance
Cleaning
Many commercially available cleaning products contain solvents that may
damage the plastic components of the chiller and cause them to crack. Do
not
use abrasive or corrosive cleaners or boiling water.
Wash with warm water and wipe down the chiller with a soft cloth or sponge,
then rinse with clean warm water and dry with a soft cloth. If required, lift up
and remove the shelves to help with cleaning. Do
not
flush the cabinet with
water.
Shelves
Adjusting the
Shelves
The chiller is supplied with three wire shelves which may be positioned at
different heights to suit various products. Each shelf is held in place with four
shelf clips which engage in the shelf support strips.
To adjust the cabinet shelves
Lighting
The chiller is lit by long life LED strip lighting. If any of the lights fail, contact
an authorised service agent to service the lights.
CAUTION
Isolate the chiller from the power supply before cleaning.
1. Remove the shelves from the chiller.
2. Remove the shelf clips from the four shelf support strips at each corner of the
chiller interior.
3. Establish the desired position for the shelves and securely engage a shelf clip
in each of the shelf support strips.
4. Sit the shelves onto the shelf support clips.
Shelf clip
Shelf support strip
Shelf
