11
SC112N-A
Maintenance
User Manual
Troubleshooting
For problems with the fridge refer to the following table.
Problem
Possible Cause
Suggestions
• Fridge is not
operating.
• Loss of power supply. • Check mains power supply.
• Interior lights are not
on.
• Electronic controller
displays ECO
indicating the fridge is
in Energy Saving
mode.
• Switch the light on while
keeping the fridge in night
mode by pressing the Light
(down) button on the
electronic controller
faceplate.
• Change the fridge to Normal
mode by pressing and
holding the Energy Save
(up) button on the electronic
controller faceplate, or hold
the door open for ten
seconds.
• Light is switched off. • Switch the light on using the
Light (down) button on the
electronic controller
faceplate.
• Electronic controller
displays Err
indicating a
refrigeration system
error.
• Arrange a service call.
• Failed LED light.
• Arrange a service call.
• Product is too warm. • Frequent door
opening.
• Limit door openings.
• Door not closing
properly.
• Check and clean the door
gasket.
• Moisture build up on
door or exterior.
• High humidity.
• Check the ambient
operating temperature and
reposition the fridge if
necessary.
• Frequent door
opening.
• Limit door openings.
• Door not closing
properly.
• Check and clean the door
gasket.
• Fridge door does not
shut properly.
• Fridge is on an
uneven surface.
• Level the fridge.
• Door is obstructed.
• Check the shelves and
product.
