10
Maintenance
User Manual
HB80-2
3 Maintenance
Cleaning
To ensure the chiller continues to run efficiently and reliably, perform routine
maintenance. Time frames specified are indicative only. More regular
cleaning and servicing may be required depending on cabinet placement
and operating environment.
WARNING
Disconnect the cabinet from the mains power supply before
attempting any cleaning or maintenance.
Cabinet
Keep the interior and exterior of the cabinet clean by
wiping regularly with a damp cloth, taking care to
keep moisture away from electrical parts. At the
same time check the condensation drain hole inside
the cabinet, to ensure that any condensation is
draining properly. Do not flush the cabinet with water.
Many commercially available cleaning products
contain solvents that may attack the plastic
components of this product and cause them to crack.
It is important to use only warm water and a small
amount of detergent when cleaning this cabinet. Do
not use abrasive or corrosive cleaners or boiling
water.
Clean the door gasket once every three months.
If ice builds up inside the cabinet, turn the thermostat
knob to ‘
0
’ to switch the cooling system off (the
cabinet fan and lights will stay on). Once the cabinet
is defrosted, turn the thermostat knob back to the
normal temperature setting (see page 8).
Condenser Coil
Clean the condenser coil, located at the back of the
cabinet, at least every three months with a soft brush
to remove any dust build-up (see instructions on
Regular Services
Arrange a thorough service clean by qualified service
personnel every six months.
