Skoda 5E5 064 711A, Fitting Instructions Manual, Page: 12 / 34

EN
12
Advice. Make sure the entire rear boot seating surface intended for
gluing the strip was perfectly free of impurities and moisture. Do not
touch the cleaned surfaces under any conditions.
- 4 -
- Tear down the protective foil off the double-sided adhesive tapes and put it to sorted
garbage.
- 5 -
- Place the strip on one side of the rear boot in right position -detail-.
- Then glue it successively along the entire length. During the gluing keep checking the strip
for correct position.
- 6, 7 -
- Press the strip carefully along the entire length with the palm of your hand.
- With the strip glued as described above, the car must now be left in a secured area
(temperature of 18 - 30 °C) for 24 hours.
Advice. The glued strip must not be unglued and then glued again,
therefore make sure you position it correctly before the gluing itself.
When handing the car over to customer familiarise them with the
recommended 48 hour time interval of not washing the car in the car
wash.