SKLZ Hurricane Category 4, Instruction Manual, Page: 6 / 18

4
Hurricane
Category 4
Instructions For Use
Step 3 – Install the impact head
component and tighten knob to lock it
onto the top end of the axle.
Slide the impact head component (A) down
onto the top end of the axle. Put an adjustment
knob into it and tighten the knob securing the
top component onto the axle.
Step 4 – Install the hook-bar and tighten
the knob to secure it.
The hook-bar (C) has four hooks on it. It serves
as the machines bottom connection for the
powerbands. Slide the hook-bar onto the
round receiver extending from the back of
your support column. The hooks should be on
top. Tighten the knob to secure it. Line up the
impact head component over the hook-bar, so
the top hook is directly over the bottom four
hooks of the hook-bar.
Step 5 – Install Powerbands – Adjust
length if necessary.
The powerbands (I) are the black bungee cords
with black plastic balls. The plastic balls connect
to the machine using the hooks on the impact
head component and hook-bar. Connect the
bottom of the powerband to the bottom of the
Hurricane on the hook bar. Then connect the
top ball to the top on the hook located on the
impact head component. If using the Hurricane
for the first time start with one powerband on
the machine.
Step-By-Step Assembly Instructions (continued)
To increase tension, knots can be tied on the powerbands to adjust the height. Slide the
bottom plastic ball on the cord and tie another knot. Now slide the ball over the knot.
N O T E
Top
Bottom