SKLZ Hurricane Category 4 Instruction Manual Download Page 11

Hurricane

 

Category 

4

 Instructions For Use

9

Right-Handed Batters

 (left-handed batters do the reverse)

» Shown are the proper angles  and positions for each of the various drills. Batters 

should always locate at an angle that directs the ball rod toward the batter’s 
back leg. This angle ensures proper ball contact  without hitting the shaft.

» Special attention should always be given to making sure each practice swing is 

performed correctly. The batter should read each swing’s contact to access the 
swing quality and power. Correction should be made when needed. It is better 
to work at a slower pace with quality swings than to work too fast and to have 
poor swing quality.

» The batter should always take the time to assume a proper stance and use 

correct mechanics.

» Batters should practice hitting all possible strike locations. The hurricane allows 

you to choose a precise location to practice hitting.

» The machine rotates in an 7 ft. circle. Make sure your safety zone is clear.

» Always check each component of the machine before use to assure each is in 

proper working condition

» Before using the Hurricane read the safety rules. Always follow those rules during 

assembly and use.

Proper “Batter-to-Machine” Positioning 

 is Vital when Using the Hurricane.

Hip-Turner 

Drill

Middle Strike 

Location

Middle Away 

Strike

Away Strike 

Location

Inside Pull 

Drill

N O T I C E

Summary of Contents for Hurricane Category 4



















Reviews: