16
TROUBLE SHOOTING
Problem
Cause
Remedy
Tool does not work.
1. Low battery capacity.
1. Charge the battery pack.
2. Tool is over-loaded.
2. Release the paddle switch and try
again.
3. Battery pack is over
temperature.
3. Turn off the wrench and cool the
battery pack under air flow.
4. Battery pack is not installed
properly.
4. Confirm that the battery is locked
and secured to the tool.
5. Damaged switch.
5. Have the switch replaced by an
Authorized SKIL Service Center or
Service Station.
The socket cannot
be installed.
The socket does not fit the
adapter or square drive anvil.
Use a suitable adapter or claimed
capacity socket.
The motor is
overheating.
Be sure cooling vents are free
of dust and obstacles.
Clean and clear the vents. Do not
cover the vents with your hand during
operation.
LED light rapidly
flashes.
1. Tool is over-loaded.
1. Release the trigger switch.
2. Tool is over-temperature.
2. Cool the tool under air flow.
Summary of Contents for PWRCORE 12 RW5763A-00
Page 52: ...52 ...
