Skil 3320-01, Operating/Safety Instructions Manual

Page: 8 / 60

8.
Unpacking and Checking Contents
To reduce the risk of injury, never
connect plug to power source outlet
until all assembly steps are complete and until you
have read and understood the entire owner’s
manual.
Model 3320 Motorized Drill Press is shipped complete in
one box.
1. Unpacking and Checking Contents. Separate all
parts from packing materials and check each one with
the “Table of Loose Parts” to make sure all items are
accounted for before discarding any packing material.
If any parts are missing, do not at-
tempt to assemble the drill press, plug
in power cord or turn the switch on until the
missing parts are obtained and are installed
correctly.
2. Remove the protective oil that is applied to table,
base and column. Use any ordinary household type
grease and spot remover.
To avoid fire or toxic reaction, never
use gasoline, naptha or similar highly
volatile solvents.
3. Apply a coat of paste wax to the table, column and
machined surfaces of base to prevent rust. Wipe all
parts thoroughly with a clean dry cloth.
Table of Loose Parts
ITEM DESCRIPTION QTY.
A Head Assembly 1
B “AA” Batteries 2
C Feed Handles 3
D Crank Handle 1
E Hex Head Bolts 4
F Table/Support Assembly 1
G Base 1
H Column & Flange Assembly 1
I Chuck Key 1
J Chuck 1
K Hex Wrench 2
L Table Support Lock Handle 1
M Worm 1
N Operating Guide 1
F
G
H
K
L
M
C
D
E
B
J
I
A
WARNING
!
WARNING
!
WARNING
!
N