Skier's Choice Moomba Craz 2019, Owner'S Manual, Page: 95 / 111

© 2018 Skier’s Choice, Inc.
94
To re-trailer the boat, position the trailer in the water with
approximately 1 inch of the top of the fender showing as in
step 3. UNLOADING.
Idle/coast the boat onto the trailer using as little power as
possible keeping it centered between the guide poles.
NOTE: DO NOT Power onto the trailer during rough
conditions.
When correctly positioned on the trailer turn off ignition.
Use the Hook and Trailer Winch to pull the boat up to the
Roller Stop.
The trailer must be positioned for the correct water depth
for loading or you may damage the boat. Varying ramp
angles require different procedures. In general, the
steeper the ramp, the more shallow the trailer should
be positioned in the water. Your local dealer can help
you understand this, should you require additional
assistance.
Make sure that the engine water intake is fully submerged.
1. Follow the cold start procedure recommended in this
manual.
2. After starting engine, unlatch Bow Eye Hook to ensure the
boat will release from the trailer.
3. With engine idling, center the steering wheel, engage the
transmission into reverse (pull back on lever,) then ease back
on the throttle.
NOTE: Because your Moomba is a true inboard, when backing
the stern will have a tendency to drift right due to propeller
rotation.