Skier's Choice 2008 Supra Launch 20, Owner'S Manual

Page: 35 / 88

© 2008 Skier’s Choice, Inc. © 2008 Skier’s Choice, Inc.
—
© 2008 Skier’s Choice, Inc. © 2008 Skier’s Choice, Inc.
Info Center Display Modes
Since the Info Center is used to support both the Instrument
System and the Perfect Pass™ Speed Control System, it
has two operating modes:
• Perfect Pass™ Speed Control Mode
• Instrument System Mode
Once the Speed Control System is activated by pressing
the ON/OFF button, the Info Center is in Speed Control
Mode and dedicated solely to the Perfect Pass™ system
until the Speed Control System is switched off by pressing
the ON/OFF button again.
While in Perfect Pass™ Speed Control Mode, the display
responds to the Speed Control Buttons and displays only
Speed Control Screens.
While in Instrument System Mode, the display responds to
the Instrument System Display buttons and displays only
Instrument System Screens.
Perfect Pass™ Speed Control Mode cannot be entered from
an Instrument System Mode set up screen.
When power is applied, the Supra Logo is displayed while the
instrument system is initializing and performing self checks.
Once the initialization routines are complete, the Info Center
returns to the operating mode it was in when the power was
removed. If it was in Instrument System Mode, it returns to
Instrument System Mode and displays the MAIN SCREEN. If
it was in Perfect Pass Mode, it returns to speed control mode
and displays the screen that was being displayed when the
power was removed.
Instrument Screens Road Map
The Instrument System data is organized into
6 screens as illustrated above.
• The Main Screen
• The Engine Screen
• The Depth — Temperature Screen
• The Set Up Screen
• The Set Up Sub Menu Screen
• The Speedometer Calibration Screen