background image

13

Pequea Machine’s Limited Warranty

Pequea Machine Company warrants to the original Purchaser all Machinery, Equipment, or Trailers 

manufactured by it, to be free from defects in material and workmanship under normal use and ser-

vice. Its obligation under this Warranty shall be limited to replacement or repair of any parts thereof, 

free of charge to the original Purchaser, at its place of business, provided, however, that the part(s) 

to be replaced or repaired, shall within one (1) year after delivery to the original Purchaser, be dem-

onstrated to be defective; which determination shall be made by the Company. The said compo-

nents or parts must be returned through the Selling dealer or distributor directly to the Company with 

all transportation charges prepaid. Notice of defect shall be furnished in writing to the Seller and to 

the agent through whom the machinery was received, disclosing in full all known defects and failure 

in operation and use, and reasonable time shall be given to the Seller to remedy any such defects 

and failures. Failure to make such trial or give such notice shall be deemed an absolute acceptance 

by the Buyer and satisfaction in full of this Limited Warranty.

This Warranty does not cover, under any circumstances, any parts, components, or materials which, 

in the opinion of the Seller and Company, have been subjected to neglect, misuse, alteration, acci-

dent, or if repaired, with parts other than those manufactured by and obtained from Pequea Machine 

Company.

This Warranty does not cover components which are already covered by a separate Warranty pro-

vided by the supplier of said parts or components.

The Company’s obligation under this Warranty is limited to repair or replacement, free of charge to 

the original Purchaser, of any part which in judgment of the Company is defective. This Warranty 

does not cover normal wear and tear.

THIS WARRANTY IS MADE EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED 

OR IMPLIED, INCLUDING ANY WARRANTY OF MERCHANTABILITY AND FITNESS FOR USE 

AND PURPOSE AND OF ALL OTHER OBLIGATIONS OR LIABILITIES ON ITS PART AND ANY 

IMPLIED WARRANTY. AND IT NEITHER ASSUMES NOR AUTHORIZES ANY OTHER LIABIL-

ITY IN CONNECTION WITH A SALE OF THIS MACHINE. THIS WARRANTY SHALL NOT APPLY 

TO THIS MACHINE OR TO ANY PART THEREOF WHICH HAS BEEN SUBJECT TO ACCIDENT, 

NEGLIGENCE, ALTERATION, ABUSE, OR MISUSE.

The Company makes no Warranty whatsoever in respect to accessories or parts not supplied by the 

Company. The term “original Purchaser” as used in this warranty, shall be deemed that person for 

whom the Machine, Equipment, or Trailer is originally supplied. This Warranty shall apply only within 

the boundaries of the continental United States.

Under this Warranty, the Company cannot guarantee that existing conditions beyond its control will 

not affect its ability to obtain materials or manufacture necessary replacement parts.

No one is authorized to alter, modify, or change the terms of this Warranty in any manner.

The Company warrants the Construction of the equipment sold herein and will replace at its ex-

pense for a period of (1) year from the date hereof, any parts which prove defective as determined 

under the terms of this Limited Warranty.

WARRANTY

Summary of Contents for PEQUEA SF5



















Reviews: