12
There are two feed roller bearings. The picture below points out the location of these bearings.
These bearings should be greased lightly every 20 hours of use.
Feed Roller Slide
The feed roller slide should always be wet with grease. Grease the feed slides every 10 hours (this
might be excessive but too much grease won’t damage the feed slide); the right feed slide grease
fittings can be accessed through the holes in the shield shown in Figure 17
LUBRICATION
Figure 16
Figure 17
Figure 18
Summary of Contents for PEQUEA CX551
Page 16: ...14 NOTES...
Page 17: ...15...
