Ski-Doo MXZ X 600 RS 2021, Operator'S Manual

Page: 65 / 211

CONTROLS, INSTRUMENTS AND EQUIPMENT
NOTE: The D.E.S.S. (Digitally Encoded Security System) can be en-
abled if desired. Contact an authorized Ski-Doo dealer.
D.E.S.S. (Digitally Encoded Security System)
After engine starting, 2 short beeps should be heard if a programmed
D.E.S.S. key (tether cord cap) is correctly snapped on engine cut-off
switch. If another beep code is heard, refer to
MONITORING SYS-
TEM for D.E.S.S. malfunction codes information.
The tether cord cap has an integrated D.E.S.S. key to provide you and
your snowmobile with the equivalent security of a conventional lock
key.
The D.E.S.S. key contains an electronic chip which features a unique
permanently memorized digital code.
Your authorized Ski-Doo dealer has programed the D.E.S.S. of your
snowmobile to recognize the D.E.S.S. key in the tether cord cap to al-
low vehicle operation.
If another tether cord is used without programming the D.E.S.S., the
engine will start but will not reach drive pulley engagement speed to
move vehicle.
Make sure the tether cord cap is free of dirt or snow.
D.E.S.S. Flexibility
The D.E.S.S. of your snowmobile can be programmed by your autho-
rized Ski-Doo dealer to accept up to 8 different keys.
We recommend the purchase of additional tether cords from your
authorized Ski-Doo dealer. If you have more than one D.E.S.S.
equipped Ski-Doo snowmobile, each can be programmed by your
authorized Ski-Doo dealer to accept the other vehicles D.E.S.S. keys.
7) Multifunction Digital Gauge
WARNING
Reading the gauge digital display can distract from the oper-
ation of the vehicle, particularly from constantly scanning the
environment.
NOTE: The gauge is factory preset in Imperial units and in English.
To change units or language, contact an authorized Ski-Doo dealer.
__________________
63