2
11) Tether Cut-Out Switch
Attach tether cord to clothing then snap tether cut-out cap over re-
ceptacle before starting engine.
To stop engine, completely pull cap from safety switch.
53) Primer Button
Pull and push button. It is not necessary when engine is warm.
To prime, activate button until a pumping resistance is felt. From this
point, pump 2 or 3 times to inject fuel in intake manifold. After prim-
ing, ensure that primer button is pushed back.
NOTE:
In very cold temperature, it is recommended to rotate primer
button 3-4 turns prior to pull it. This will eliminate the possibility of
sticking.
54) Octane Level Switch
NOTE:
This switch is disabled (not operative) on vehicles modified for
warranty validation.
Select octane level according to fuel octane number used.
A32A0TA
MMO2002_005_A.fm Page 2 Wednesday, June 27, 2001 2:36 PM
Summary of Contents for MX Z X 440 2002
Page 1: ......