Section 04
ENGINE
Subsection 07
(REWIND STARTER)
04-07-2
MMR2000_122_04_07A.FM
REMOVAL
The following must be removed before rewind
starter removal:
– chain guard
– drive chain
– clutch
– muffler
– disconnect fuel hose
– engine
Using a small screwdriver, extract rope knot from
starter grip
no. 1
. Cut rope
no. 2
close to knot. Tie
a knot near starter.
Mark rewind starter housing
no. 4
position for re-
assembly.
Remove screws
no. 3
securing rewind starter
housing
no. 4
to engine then remove rewind start-
er ass‘y.
DISASSEMBLY
To remove rope from rewind starter mechanism:
Place rewind starter ass‘y on a bench.
– First remove screw
no. 5
, then ratchet guide
no. 6
.
– Remove friction spring
no. 8
and both ratchets
no. 9
with springs
no. 10
.
– Remove sheave
no. 7
from starter housing, as
shown in the next illustration.
1. Sheave
2. Rewind starter housing
WARNING
Since the spring is tightly wound inside the
guide it may fly out when rewind is handled.
Always handle with care.
A31C1BA
1
2
Summary of Contents for Mini Z 2000
