Ski-Doo Mini Z 2000, Shop Manual

Page: 126 / 160

Section 07 REAR SUSPENSION
Subsection 02 (REAR SUSPENSION)
07-02-6
MMR2000_130_07_02A.FM
19,20, Upper Idler Wheels
Remove bushing no. 20 and idler wheel no. 19
from shaft no. 4 , as shown in the next photo.
Clean parts and check for wear and bearing condi-
tion.
CHECK BUSHING, WHEEL AND SHAFT CONDITION
21, Slider Shoe
Inspect slider shoes no. 21 for wear.
CAUTION: Even if only one slider shoe needs
to be replaced, always replace both ones. Slid-
er shoes must always be replace in pairs.
To replace slider shoes:
– Remove left side runner.
– Bend tabs from used slider shoe then remove it.
– Install new slider shoe on one end of the runner,
then clip second end.
– Secure slider shoe by bending tabs onto runner.
– Repeat procedure on right side.
A31F0HA