Ski-Doo CK 3, Operator'S Manual

Page: 35 / 131

33
Beep and Pilot Lamp Codes
NOTE: Only models with RER have a beeper.
After engine is started 2 beeps and 2 DESS pilot lamp blinks confirm
that the micro-processor has recognized the tether cord. The vehicle
can be normally driven.
A beep per 3 seconds and DESS pilot lamp blinking as same rate
mean that a bad connection has been detected. Vehicle can not be
driven.
To check for bad connection, remove tether cord. Make sure it is free
of dirt or snow. Reinstall tether cord and restart engine. If a beep per
3 seconds still occurs contact an authorized dealer.
1. Free of dirt or snow
A rapid beeping and DESS pilot lamp blinking at same rate mean that
a wrong tether cord is installed. Vehicle can not be driven.
Check that you have both good vehicle and tether cord.
8) DESS Pilot Lamp
This lamp will light up to confirm DESS status. Refer to previous
paragraphs for description.
A30H08A
1
mmo9903a.bk : mmo9903b.fm5 Page 33 Monday, June 15, 1998 8:05 AM