Ski-Doo 2006 Mini Z Operator'S Manual Download

Page: 65 / 103

ENGINE LACKS ACCELERATION OR POWER (cont’d)

5. Engine is overheating.

–

Clean cooling fins of engine; if overheating persists, contact
an authorized SKI-DOO dealer.

ENGINE BACKFIRES

1. Faulty spark plug (carbon accumulation ) or wrong gap.

–

See item 5 of ENGINE TURNS OVER BUT FAILS TO START.

2. Engine is running too hot.

–

See item 5 of ENGINE TURNS OVER BUT FAILS TO START.

3. Ignition timing is incorrect or there is an ignition system fail-

ure.

–

Contact an authorized SKI-DOO dealer.

ENGINE MISFIRES

1. Fouled/defective/worn spark plug or wrong gap.

–

Clean/verify spark plug gap and heat range. Replace as re-
quired.

2. Water in fuel.

–

Drain fuel system and refill with fresh fuel.

SNOWMOBILE CANNOT REACH FULL SPEED

1. Incorrect track adjustment.

–

See REPAIR AND MAINTENANCE and/or dealer for proper
alignment and tension adjustments.

2. Engine.

–

See items 1, 2 and 5 of ENGINE LACKS ACCELERATION OR
POWER.

__________________________

Summary of Contents for 2006 Mini Z








































































































Search results

Summary of Contents for 2006 Mini Z

Reviews:

Related manuals for 2006 Mini Z

Brands by name

Popular brands

Ski-Doo 2006 Mini Z, Operator'S Manual

Search results

Summary of Contents for 2006 Mini Z

Reviews:

Related manuals for 2006 Mini Z

Brands by name

Popular brands