Ski-Doo 2006 Mini Z Operator'S Manual Download

Page: 84 / 103

Wax the hood and the painted portion of the frame for better protec-
tion.

NOTE:

Apply wax on glossy finish only. Protect the vehicle with a

cover to prevent dust accumulation during storage.

CAUTION:

The snowmobile has to be stored on a cool and dry

place and covered with an opaque tarpaulin. This will prevent
sun rays and grime from affecting plastic components and vehi-
cle finish.

Lift rear of vehicle until track is clear of the ground, Install on a wide-
base snowmobile mechanical stand.

NOTE:

Do not release track tension.

Bulb Replacement

Always check light operation after bulb replacement.

Headlamp

Find which bulb is burnt, then replace it with a new one (P/N 415 128
619).

Unplug electrical connector then, turn bulb counterclockwise to re-
move it.

A31E0WA

Electrical connector

_________________________

Summary of Contents for 2006 Mini Z








































































































Search results

Summary of Contents for 2006 Mini Z

Reviews:

Related manuals for 2006 Mini Z

Brands by name

Popular brands

Ski-Doo 2006 Mini Z, Operator'S Manual

Search results

Summary of Contents for 2006 Mini Z

Reviews:

Related manuals for 2006 Mini Z

Brands by name

Popular brands