SKF TKTI 10, Instructions For Use Manual

Page: 7 / 32

6 SKF TKTI 10
2.2 Charging internal battery
• The TKTI 10’s battery can be charged in the camera by connecting the supplied 12V
power supply unit into the DC socket in the hatch of the thermal camera (see figure 2;
connection ports).
• The battery condition indicator appears on the screen when the imager is switched on
(see figure 3).
• The red led indicates that the camera is charging. The green led means that the
camera is fully charged (see figure 2).
• The rechargeable battery will power the TKTI 10 for approximately 6 hours.
red/green charging indicator
Figure 2. Connection ports
Temperature
Span
Level
Spot Emissivity Reflected Battery
temperature temperature condition
Status of Direct access buttons
The yellow bordered icon is the active function.
Figure 3. Screen overview